music hall mmf-7.1 INSTRUCTION MANUAL music hall http://www.musichallaudio.com august 2007
The tonearm is now zeroed. Check it, by once again floating the tonearm between the tonearm rest and the platter. If the tonearm doesn’t float paral
NOTE If you are substituting another cartridge for the Goldring Eroica, you may need to make the following further adjustments to the tonearm (9) and
If you have any further questions regarding the adjustment of your turntable, please contact your music hall dealer. Azimuth Adjustment: Azimuth is
MAINS CONNECTION Locate the wall transformer. It’s in a small white box set into the underside of the packing foam. Plug the small male end of the w
BELT - The belt should last for many years. The belt can be cleaned at the same time as the pulley. The best way to clean the belt is to pull it gentl
TECHNICAL SPECIFICATIONS: Power Supply: 115V/60Hz or 230V/50Hz Power Absorption: 2VA Speeds: 33⅓ rpm (manual change to 45 rpm) Speed deviation:
TROUBLESHOOTING music hall turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. If, f
Fit the stylus guard on the cartridge and attach the tonearm locking strap (18) to the tonearm (9). Insert and tighten the transport screws (1). Pac
WARRANTY This entitles you to have the music hall mmf-7.1 repaired free of charge, at our discretion, for one year after the date of purchase, at any
CONGRATULATIONS ON YOUR PURCHASE You have selected an exceptional turntable. Each component used in the construction of the mmf-7.1 was selected to p
7. Cleaning Please refer to the MAINTENANCE section for detailed cleaning instructions. 8. Power Sources Connect the turntable only to a power s
PARTS INVENTORY AND OPERATION CONTROL DIAGRAM 1. 3 x removable transport screws 2. 1 x stepped motor pulley 3. 1 x drive belt (packaged in parts
GETTING STARTED Thank you for purchasing the music hall mmf-7.1 turntable. The music hall mmf-7.1 turntable is 2-speed belt-driven, audiophile qualit
FOR YOUR INFORMATION This manual provides valuable information that will help you get optimum performance from your system. Please contact your author
SET-UP The music hall mmf-7.1 is supplied partially disassembled and carefully packaged for safe transport. To assemble the turntable, please follow t
13. Place the counterweight (6) onto the tonearm. To do this, position yourself in front of the turntable. Hold the counterweight so that the num
Kommentare zu diesen Handbüchern