MUSIC HALL mmf-5.1se Bedienerhandbuch

music hall mmf-5.1se INSTRUCTION MANUAL music hall http://www.musichallaudio.com august 2007

10 Move the tonearm (9) (adjusted for the correct tracking force of your cartridge) to the pattern. When the stylus tip of the cartridge is at point

11 You may need to go back and forth a couple of times to achieve the best setting. Please note that small changes in azimuth make a big difference

12 over the spindle and set it on top of the felt mat. Place the single on the platter and play. Do not use the record clamp with 7-inch records.

13 TECHNICAL SPECIFICATIONS: Power Supply: 115V/60Hz or 230V/50Hz Power Absorption: 2VA Speeds: 33⅓ rpm (manual change to 45 rpm) Speed deviatio

14 TROUBLESHOOTING music hall turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. I

15

16 WARRANTY This entitles you to have the music hall mmf-5.1se repaired free of charge, at our discretion, for one year after the date of purchase, a

2 CONGRATULATIONS ON YOUR PURCHASE You have selected an exceptional turntable. Each component used in the construction of the mmf-5.1se was selected

3 7. Cleaning Please refer to the MAINTENANCE section for detailed cleaning instructions. 8. Power Sources Connect the turntable only to a powe

4

5 Parts Inventory and Operation Control Diagram 1. 3 x removable transport screws 2. 1 x stepped motor pulley 3. 1 x drive belt (packaged in part

6 GETTING STARTED Thank you for purchasing the music hall mmf-5.1se turntable. The music hall mmf-5.1se turntable is a 2-speed, belt driven turntabl

7 SET-UP The music hall mmf-5.1se is supplied partially disassembled and carefully packaged for safe transport. To assemble the turntable, please fol

8 1.75 g is between 17 and 18g on the scale (6a). To set the tracking force you must first balance (zero) the tonearm (9). The objective of balanci

9 12. Locate the anti-skating weight (16). You will notice a small fishing line attached to the anti-skating weight (16). Slip the looped end of t