MUSIC HALL MMF-2.1 Bedienerhandbuch

1 music hall mmf-2.2/le INSTRUCTION MANUAL music hall http://www.musichallaudio.com august 2007

10 VTA like Tracking Force can also be set by ear. Feel free to experiment with VTA positions slightly above or below parallel and choose the positi

11 with a large center hole), you may need to use the black 45 rpm adaptor. Simply, center the adapter over the spindle and set it on top of the fel

12 TECHNICAL SPECIFICATIONS: Power Supply: 110V/60Hz Power Absorption: 2VA Speeds: 33⅓ rpm (manual change to 45 rpm) Speed deviation: ± 0.9% Wo

13 TROUBLESHOOTING music hall turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. I

14 Fit the stylus guard on the cartridge, insert the red motor-transport screws (1), and lock the tonearm (18). Package the turntable carefully in

15 WARRANTY This entitles you to have the music hall mmf-2.2 repaired free of charge, at our discretion, for one year after the date of purchase, at

2 CONGRATULATIONS ON YOUR PURCHASE You have selected an exceptional turntable. Each component used in the construction of the mmf-2.2 was selected t

3 7. Cleaning Please refer to the MAINTENANCE section for detailed cleaning instructions. 8. Power Sources Connect the turntable only to a powe

4

5 PARTS INVENTORY AND OPERATION CONTROL DIAGRAM 1. 2 x motor transport screws (marked red) 2. 1 x stepped motor pulley 3. 1 x drive belt, pack

6 GETTING STARTED Thank you for purchasing the music hall mmf-2.2 turntable. It is a 2-speed belt-driven, audiophile turntable that comes complete w

7 counterclockwise onto the back of the tonearm. Don't worry about the exact position of the counterweight or the tracking force scale, they wi

8 to the platter at zero, return to the previous steps and make the necessary adjustments. Return the tonearm to the tonearm rest. IMPORTANT Do

9 NOTE If you are substituting another cartridge for the Music Hall 'Tracker', you may need to make the following further adjustments to th